A-A-78C
B. Sampling: All sampling shall be performed in accordance with MIL-STD-105.
(1) Sampling for Visual Inspection. A random sample of tape dispensers shall be taken from each lot. The inspection level shall be S-3 with an Acceptable Quality Level (AQL) of 4.0 percent defective. The sample unit shall be one tape dispenser.
(2) Sampling for Dimensional Inspection. A random sample of tape dispensers shall be taken from each lot. The inspection level shall be S-3 with an Acceptable Quality Level (AQL) of 4.0 percent defective. The sample unit shall be one tape dispenser.
(3) Sampling for Tests. A random sample of tape dispensers shall be taken from each lot. The inspection level shall be S-1 with an AQL of 5.0 percent defective. The sample unit shall be one tape dispenser.
(4) Sampling for Preparation for Delivery. For examination of the preparation for delivery. The sample unit shall be one shipping container fully prepared for delivery, selected at random. The inspection level shall be S-2 with an AQL of 4.0 percent defective.
C. Inspections.
(1) Visual Examination. Samples taken in accordance with paragraph 4.B.1 shall be examined to verify that the superficial product characteristics are in compliance with section 1.
(2) Dimensional Examination. Samples are taken in accordance with paragraph 4.B.2 shall be examined to verify that all dimensionally measurable product requirements are in compliance with section 1.
(3) Tests. Samples are taken accordance with paragraph 4.B.3 shall be subjected to the following test to demonstrate consistency in product functionality, durability, and performance expectations. The below test shall be performed only at the beginning of the contract (before the first shipment), and after a design change that affects any functional aspect of the tape dispenser.
Capacity and Performance Test:
Place in the dispenser, an appropriate commercially used tape,
3 inches wide (+ 1/32) with a maximum outside roll diameter of
8 inches and an inner core diameter of at least ½ inch.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business