F. Moisten the tape by brush or brushes using water is stored in a visible, non-shatterable, refillable plastic container with a minimum capacity of 16 ounces.
G. Maintain the water at a commercially acceptable temperature by a built-in top heater and thermostat. The amount of water applied shall be regulated in accordance with commercial practice.
H. Most the requirements of either UL 114 or UL 1950. The label or listing based on the re examination service of the Underwriters’ laboratories, Inc. shall be accepted as evidence that the dispenser conforms to applicable requirements.
H. Have feet or a base that will not mar work surfaces (e.g. wood, glass or metal) and provide lateral stability.
I. Come complete with operating and servicing instructions.
J. Be marked in a legible and permanent manner with the manufacturer’s name and/or trademark.
Workmanship. Except for the cutting edge of the blade, the tape dispenser shall be of sharp edges. The tape dispenser shall also be free of any defects which will adversely affect appearance, impair serviceability, or which might constitute a personal hazard to the user, including, but not limited to, superfluous coating of any kind, burrs, scratches, niches, dents, blisters, crinkling, imbeded foreign matter, or discoloration. Any fasteners or pins used in the assembly shall be set in accordance with normal commercial practice, including, but not limited to, exhibiting a firmly tightened, flush-seating. The tape dispenser shall not exhibit evidence of deformity, including, but not limited to cracking, bending, loosened parts, warping, or visible stress marks, after testing as prescribed in paragraph 4,C,3.
Corrosion Resistance. Except for the actual cutting edge of the blade, all metal parts shall be resistant to corrosion. Individual parts shall be either corrosion resistant, stainless steel or anodized, plated, finished with baked enamel, subjected to a bluing process or whatever is commercially appropriate for the specific function of the part. The contractor shall provide a manufacturer’s chemical certification of corrosion resistance upon request by the Government.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business