This description covers electrically operated tape dispensers which are used for dispensing reinforced or gummed paper tape that requires water activation for adhesion.
1. SALIENT CHARACTERISTICS:
Tape Dispensers shall:
A. Have two length selection devices so that two lengths can be preset as desired. At a minimum, length selection settings shall be at 2-inch increments. In addition to the 2-inch increments other length selection settings shall be acceptable.
B. Dispense tape lengths of between 6 and 60 inches (minimum range) and 6 and 84 inches (maximum range).
C. Have the capability to automatically measure, feed, moisten, dispense, and cut either of the two preset lengths.
D. Dispense tape at a speed of atleast 3 feet per second.
E. Accommodate a tape roll at least 1-1/2 to 3-1/32 inches wide with an outer tape roll diameter of at least 7-1/2 inches. Due to tape variations, the dispenser shall be capable of dispensing tape with various core sizes. The tape shall not bind against any part of the dispenser when tested in accordance with paragraph 4, C, 3.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business