A-A-79C
F. Accommodate a tape roll of 1 inch up to 3-1/32 inches wide, 8 inches maximum outer diameter, with an inner core diameter of at least ½ inch (+1/16,-0)
G. Have a feet or rubberized base that will not mar work surfaces (e.g. wood, glass or metal) and provide lateral stability.
H. Be marked in a legible and permanent manner with the manufacturer’s name and/or trademark.
Workmanship. Except for the cutting edge of the blade, the tape dispenser shall be free of sharp edges. The tape dispenser shall also be free of any defects which will adversely affect appearance, impair serviceability, or which might constitute a personal hazard to the user, including, but not limited to, superfluous coating of any kind, burrs, scratches, niches, dents, blisters, crinkling, imbedded foreign matter, or discoloration. Any fasteners or pins used in assembly shall be set in accordance with normal commercial practice, including but not limited to, exhibiting a firmly tightened, flush seating. Component parts shall be easily removable for cleaning or replacement. The tape dispenser shall not exhibit evidence of deformity, including, but not limited to cracking, bending, loosened parts, warping, or visible stress marks, after testing as prescribed in paragraph 4.C.3.
Corrosion Resistance. Except for the actual cutting edge of the blade, all meatal parts shall be resistant to corrosion. Individual parts shall be either corrosion resistant stainless steel oranodized, plated, finished with baked enamel, subjected to a bluing process, or whatever is commercially appropriate for the specific function of the part. The contractor shall provide a manufacturer’s chemical certification of corrosion resistance upon request by the Government.
2. APPLICABLE DOCUMENTS AND DOCUMENT SOURCE:
The following documents form a part of the Commercial Item Description to the extent specified herein. Unless otherwise indicated, the issue in effect on the date of invitation for bids or request for proposal shall apply:
Federal Standard:
Fed.Std.No.123, Marking for Domestic Shipment (Civil Agencies).
Activities outside the Federal Government may obtain copies of Federal Specifications, Standards, Handbooks, and Commercial Item Descriptions (CIDs), as outlined under General Information in the Index of Federal Specifications, Standards and Commercial Item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business