A-A-561A
supplier, spring tension clips may be fabricated from 400 series (AISI) quarter hard stainless steel not less than 0.51 mm (0.020”) in thickness. The width of the steel for spring tension clips shall be 9.53 + 1.59 mm (3/8 + 1/16”).
B. Workmanship. All parts shall be free from burrs, slivers, and sharp edges. The racks shall be free from defects and imperfections which affect appearance or impair serviceability.
3. QUALITY ASSURANCE:
A. Responsibility for Inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in this Commercial Item Description, where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
B. Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices.
C. Sampling. Samples shall be selected for inspection in accordance with MIL-STD-105. A lot shall consist of number of sample units manufactured by the same process from the same components at the same time. Random samples shall be drawn from each lot for the end item inspection. The sample unit shall be one rack. The inspection level for construction and workmanship shall be S-4 and the AQL shall be 4.0 percent defective.
4. REGULATORY REQUIREMENTS: The issue of the referenced documents in effect on the date of the solicitation for offers or request for proposals shall be used to determine conformance with the requirements of this commercial item description.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business