A-A-356A
3. Regulatory Requirement.
The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
4. Quality Assurance Requirements:
4.1 Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and therefore as may be otherwise provided for under the provisions of the contract.
4.2 Examination and Testing.
4.2.1 Suppliers are encouraged to use Quality Control (QC) techniques that exhibit control over their prcosses (e.g.(Statistical Process Control) SPC tecniques) as defines in American National Standards Institute (ANSI) Z1.1, Z1.2 and Z1.3/ American Society for Quality Control (ASQC) B.1, B.2, and B.3 that systematically reduce excess variations. If used, objective evidence shall be available that demostrates overall measurement adequacy techniques and controls. These techniques shall ensure quality levels equal to, or greater than those cited in applicable technical document or, herein.
4.2.2 End item inspection/testing may be used by the offeror or the Government representative, as a means to determine the effectiveness of the in process quality controls. In process controls shall not be substituted for end item performance testing.
4.2.3 For those characteristics for which there are no such controls, or for end item performance test, lot by lot sampling for inspection/ test shall be required. The sample unit shall be one marker. Sampling shall be in accordance with the American National Standards Institute (ANSI)/ American Society for Quality Control (ASQC) Z1.4, Sampling Procedures and Tables for Inspection by Attributes.
4.2.4 An inspection lot shall consist of all like items submitted for inspection at one time. The inspection level for visual and dimensional testing shall be S-2 with an AQL of 4.0 percent defective. The inspection level for performance testing shall be S-1 with an AQL of 6.5 percent defective. The supplier must provide objective evidence (tests and inspection records) that the presented material meets the requirements of the sampling plan as indicated above.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business