A-A-1022B
5.2.4 For Visual and Dimensional inspections, the level shall be S-3 with an Acceptable Quality Level (AQL) of 4.0 Percent Defective. The inspection level for performance testing shall be S-1 with an Acceptable Quality Level of 4.0 percent defective. The supplier must provide objective evidence (test and inspection records) that the presented material meets the requirements of this commercial item description.
5.3 Testing.
5.3.1 Sampling for Design Test: Samples shall be taken from the first ten (10) manufactured. At the beginning of the contract cycle or when the design is modified, design testing shall be performed. Design tests shall include all Operational and Performance Tests.
5.3.2 Routine Testing During The Contract Period: During the contract, lot testing shall be performed. Performance test variations is such “Each cutting operational shall be performed ten (10) times. At least nine (9) of the cuts shall leave the edges straight and clean”. Rigidly tests may be performed periodically at the discretion of the Government.
5.3.4 Rigidity Test. Place a 30 kg (66.15 lb.) mass in the center of the cutting blade. The mass shall contact 250 sq.cm + 13 sq. cm (38.74 sq. in. + 2.01 sq. in.) of the table’s surface. The body shall not deflect more than 5 mm (0.196 in).
5.4 Performance Tests.
5.4.1 9.07 kilogram (20-lb), Book Paper, Chemical Pulp, (Weight Basis 17x22-500). This test shall demonstrate the capacity of the trimmer to consistently cut ten (10) sheets of 20.828 cm x 27.94 cm (8-1/2” x 11”) 9.07 kilogram (20-lb.) bond paper at one time, leaving the cut edges straight and clean. The cutting shall be performed along an edge at least 27.94 cm (11”) long. The cutting shall be performed 100 times. At least 95 of the cuts shall leave the edges straight and clean. In addition, the trimmer shall not exhibit evidence of deformity (See Section 3) after the tests. Examination shall by the naked eye, only.
5.4.2 36.28 kilogram (80-lb)- Book Paper, Chemical Pulp, (Weight Basis 25x38-500). This test shall demonstrate the capability of the trimmer to consistently cut four (4) sheets of 36.28 kilogram (80-lb.). Book Paper, leaving the cut edges straight and clean. The cutting shall be performed along an edge at least 27.94 cm (11”) long. The cutting shall be performed 100 times. At least 95 of the cuts shall leave the edges straight and clean. In addition, the trimmer shall not exhibit evidence of deformity after the tests. Examination shall be by the naked eye, only.
6. Packaging:
6.1 Preservation, packing and marking shall be as specified in the contract or order.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business