A-A-723C
7. Notes:
7.1 Part Identification Number (PIN). The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor.
This example describes a part numbering system for CID A-A-723C
A-A-723C- 1 B
1----------------------------- Type: 1- Type I Pencil, Mechanical (Top Activated)
B- Type II Pencil Mechanical (Side Activated)
Size A-0.5 mm
B ---------------- B-0.7 mm
7.1 Applicable Documents. The following documents, of the issues on the date of invitation for bids or request for proposal, form a part of this document to the extent specified herein.
7.1.1 Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Documents, Government Printing Office, Washington DC 20402.
7.1.2 ANSI/ASQC Z1.4- may be obtained from the American Society for Quality Control, PO Box 3005, 611 E. Wisconsin Avenue, Milwaukee, Wisconsin 53201-4606.
7.2 Ordering information. Purchasers shall select the required options permitted herein, and include the following information in procurement documents:]
A. Title, number, and date of this commercial item description.
B. Purchasers shall specify the type, and size, as required (See Classification).
C. Purchasers shall specify arrangement for inspection and facilities if other than specified.
D. Purchasers shall specify packaging, packing, and any special marking for shipment.
E. Purchasers shall specify identification marking, if other than required.
F. Purchasers shall specify if bar coding is not required.
G. Purchasers shall specify palletization, if required.
H. Purchasers shall specify if MSD’s are required, in addition to those required by Fed-Std-313.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business