A-A-565B
2.5 The body shall be at least .7937 cm (5/16 inch) thick with characters raised in relief at least 7.924 cm (1/32 inch). The printed height of the characters shall be .3571 cm (1/32 inch), or as stated in the procurement documents.
2.6 The fixed legend characters shall be raised in relief at least 7.924 cm (1/32 inch) from a rubber body that is at least .7937 cm (5/16 inch) thick.
2.7 The inner part of the die shall have a fixed legend consisting of an arrow centered over the legend “RECEIVED” or “DISPATCHED” and the name or other designation of the using activity: both to be specified in the contract or order.
2.8 The outer part of the die shall have a time legend within a border of two concentric circles. The time legend shall be graduated and numbered for the hours “1” through “12”. Each hour shall be graduated at 1/4 hour intervals.
2.9 Each stamp shall produce clear, distinct, sharp single impressions of equal intensity, with no closing of characters.
2.10 The removable type shall not become visual and mechanical locking indexing means for pointing the arrow to a desired time without sight of the die.
2.11 The base shall not become visual and mechanical locking indexing means for pointing the arrow to a desired time without sight of the die”
2.12 The front of the inner die shall be readily identifiable.
2.13 All metal components shall have a commercially acceptable plating or coating. The finish shall be suitable to protect against corrosion. Contractor shall provide certification of plating conformance, upon request by the government.
2.14 When specified in the procurement documents, a replica of the legend shall be fixed to the front of the stamp base.
2.15 All metal components shall have a commercially acceptable plating or coating suitable to protect against corrosion.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business