A-A-2779A
6.2 Machine Write Test. The machine tests shall be conducted on a Anja W-10B, K&L machine broad tip marker tester, or equivalent, with parameters set according to the machine’s specific testing procedures.
7. Packaging:
7.1 Presevation, packing, and marking shall be specified in the contract or order.
8. Notes:
8.1 Part Identification Number (PIN). The following part identification numbering procedure is for government purposes and does not constitute a requirement for the contractor.
This example describes a part numbering system for CID A-A-2779A:
A-A-2779A 1 B
1 = Type: I - Non-Fluorescent Highlighter
II - Fluorescent Highlighter
III - Fluorescent Highlighter
B = Class: A – Tube Type
B – Flat Type
8.2 Applicable Documents. Issues of the following documents, in effect on the date of invitation for bids or request for proposal from a part of this document to the extent specified herein.
8.2.1 Technical Association of the Pulp and Paper Industry (TAPPI).
T479 method may be obtained from TAPPI, Technology Park, P.O. Box 105113, Atlanta, Georgia, 30348-5113.
8.2.2 Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Documents, Governments Printing Office, Washington DC 20402.
8.2.3 Application for copies of (ANSI) Z1.1, Z1.2 and Z1.3 and (ASQC) B.1, B.2 and B.3 may be obtained from the American Society for Quality Control. PO Box 3005, 611 E. Wisconsin Avenue, Milwaukee,WI 53201-4606.
8.2.4 JCP Specifications may be obtained from Chief Paper Procurement Section, MMPP, US Government Printing Office, North Capital and H Street, NW, Washington DC 20401.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business