A-A-2779A
3.4 All markers shall be a non-refillable type with ink held in the reservoir by an absorbent material (no free flowing liquid). The marker shall be equipped with a tight fitting plastic or metal protective cap to provide protection against evaporationand leakage. The marker shall be made of plastic or metal or a combination of these materials and the cap or body shall be colored to identify the color of ink.
3.5 The marker shall be furnished in the following colors: Blue, Green, Pink, Yellow, Orange, and Magenta as specified in paragraph 8.3 (Notes).
3.6 The overall length of Types I, II and III markers shall be not less than 11.6 cm (4.9 inches), with the cap in place.
3.7 The manufacturer’s name or trademark shall be exhibited on the marker. Placement of these permanent markings shall be at the option of the manufacturer, provided they are prominently displayed.
3.8 Clip Caps. When flat type markers are specified, they shall be provided with a metal or plastic clip type cap.
3.9 Shelf Life. The markers shall have a minimu shelf life of eighteen (18) months after delivery and shall be capable of withstanding normal usage and handling.
3.10 Workmanship. The markers shall be free from defects or imperfections of manufcture which may affect their durability, appearance or serviceability or present a hazardto the user. The surface of the marker shall be of uniform appearance and shall be free from rough or sharp edges, burrs, blisters, scratches and other defects.
4. Regulatory Requirements:
The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. Quality Assurance Requirements:
5.1 Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifiactions, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and therefore as may be otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business