A-A-2778
2.7 The cap or body shall be colored, or have a colored marking to indicate the color of ink content. The surface of the marker and all components shall have a smooth, uniform appearance and shall be free from bonds, delaminations, porosity, warpage, cracks, checks, chips, rough, or sharp edges, burrs, blisters, or scratches.
2.8 The manufacturer’s name or trademark shall be exhibited on the marker. Placement of these permanent markings shall be at the option of the manufacturer, provided they are prominently displayed.
2.9 Shelf Life. The markers shall be able to meet all the requirements of this specification from the time of delivery to a minimum of 18 months in storage under normal storage conditions. Suppliers shall replace, without cost to the government, all markers failing to meet this requirement.
3. Regulatory Requirements:
“The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR)”
4. Quality Assurance Requirements:
4.1 Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and therefore as may be otherwise provided for under the provisions of the contract.
4.2 Examination and Testing.
4.2.1 Suppliers are encouraged to use quality control (QC) techniques that exhibit control over their processes (e.g. (Statistical Process Control) SPC Techniques) as defined in American National Standards Institute (ANSI) Z1.1, Z2.2 and Z 1.3 / American Society for Quality Control (ASQC) B. 1, B.2 and B.3 that systematically reduce excess variations. If used, objective evidence shall be available that demonstrates overall measurement adequacy techniques and controls. These techniques shall ensure quality levels equal to, or greater than, those cited in applicable technical document or, herein.
5.2.2 End item inspection/testing maybe used by the offeror or the Government representative, as a means to determine the effectiveness of the in process quality controls. While in process controls shall not be substituted for end item performance testing.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business