A-A-135C
2.5 The handle shall be 19.05 mm + 1.40 mm (3/4+ 1/8 inches) wide, if straight, or, tapered from a maximum 22.22 mm (7/8 inch) at the handle end to a minimum 12.70 (1/2 inch) wide at the blade handle junction, it shall have a handle that is either flat or decorative. If flat, handle shall be no less than 1.60 mm (1/16 inch) thick; and if decorative, they shall be of plastic, hard rubber, metal, bone or wood. Decorative handles shall be affixed to the blade so as not be become loose with use causing the blade to twist or fall off.
2.6 Workmanship: The letter openers shall be free of any defects which may adversely affect the appearance, impair serviceability or which may present a personal hazard to the user, including but not limited to, superfluous coating of any kind, burrs, niches, scratches, discoloration or rough sharp edges.
2.7 Corrosion Resistance: The entire letter opener (if fabricated from metal) or the blade (if designed with a decorative handle) shall be either corrosion resistant stainless steel or anodized, plated, finished with baked enamel. The contractor shall provide a manufacturer’s chemical certification of corrosion resistance upon request by the Government.
3. Regulatory Requirements: The offeror/contractor is encouraged to use recovered materials to the maximum extent practical, in accordance with paragraph 23,403 of the Federal Acquisition Regulation (FAR).
4. Quality Assurance Provisions:
4.1 Product Conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer’s own drawings, specifications, standards and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
5. Packaging: Packaging, packing, palletization and marking shall be as specified in the contract or order.
6. Notes:
6.1 Source of Documents. The following products form a part of the Commercial Item Description to the extent specified herein. Unless otherwise indicated, the issue in effect on the date of invitation for bids or request for proposal shall apply.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business