roller-point pens containing water based ink cartridges, with corrosion resistant balls having points of .2mm, .3mm, .5mm or .7 mm (all point sizes shall have a tolerance of +_ .05 mm) as specified in the order or contract.

Pages 1 - 2 - 3 - 4 - 5 - 6

A-A-2695B

The pens shall be written a minimum distance for the types as listed: Type I-900 meters (2953 feet). Type II- 1000 meters (3280 feet). Type III- 1300 meters (4265 feet) and Type IV- 900 meters (2953 feet). Smooth writing shall start within the first 10 centimeters of the writeout without starvation or fluctuation of the line intensity. Visual defects include blobs, skips, dotting and density variations of line intensity. Actual length of each visual defect shall be totaled for each cartridge for the entire writeout and shall not exceed 1% of the written line.

6. Packaging:

6.1 Preservation, packing, and marking shall be as specified in the contract or order.

7. Notes.

7.1 Part Identification Number (PIN):

The following part identification numbering procedure is for government purpose and does not constitute a requirement for the contractor.

A-A-2695 A 4 Describes an ultra fine point roller-point pen in accordance with A-A-2695-B.

A- Size:
A. .2mm (Ultra-Fine)
B. .3 mm (Extra-Fine)
C. .5 mm (Fine)
D. .7 mm (Medium)

4- Types:
I. Executive
II. Retractable.
III. Non-Retractable
IV. Roller-point

7.2 Source of Documents. Issues o the following documents, in effect on the date of invitation for bids or request for proposal, form a part of this document to the extent specified herein.

7.2.1 Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Documents, Government Printing Office, Washington, DC 20402.

7.2.2 ANSI/ASQC Z1.4 may be obtained from the American Society for Quality Control P.O. Box 3005, 611 E. Wisconsin Avenue, Milwaukee, WI 53201-4606.

7.2.3 JCP-O-60 specifications may be obtained from Chief Paper Procurement Section, MMPP, US Government Printing Office, North Capital and H Street, NW, Washington DC 20401.