[METRIC]
A-A-567B
April 9, 1997
Superseding
A-A-567A
January 22, 1990
COMMERCIAL ITEM DESCRIPTION
NUMBERING AND LETTERING STAMP
The General Services Administration has authorized the use of this commercial item description by all Federal agencies.
1. Scope. This Commercial Item Description covers non-fixed dating stamps for dating various correspondence, documents and printed material.
2. Salient Characteristics:
2.1 Each stamp shall consist of 2 to 10 endless rubberized fabric bands mounted on a suitable frame. Bands, which consist of a fabric backing with a thin film or rubber of facilitate movement on the drums, shall be considered part of the base.
2.2 Without binding or slipping out of place, each band shall rotate readily and independently on clogged drums by means of a serrated thumbwheel.
2.3 Characters shall be raised in relief by a minimum of 7.92 cm (1/32 inch) from a .159 cm (1/16-inch) minimum thickness base and vulcanized onto the bands.
2.4 The printed height of the characters shall be one of the following, to be specified in the procurement documents:
|
Commercial Size Number |
Printed Height (inches) (Tolerance: Plus/Minus 3.962 cm 1/64-inch) |
|
0 |
.278 cm (7/64-inch) |
|
1 |
.318 cm (8/64-inch) |
|
1 1/2 |
.357 cm (9/64-inch) |
|
2 |
.436 cm (11/64-inch) |
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to General Services Administration, Federal Supply Service, Engineering Branch, 26 Federal Plaza, New York, NY 10278. |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business